Pex Insert Fittings
10 Pack, 1", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 1", Lead Free Brass Barb Insert Tee, For Connecting 3 Pieces Of 1" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
5 Pack, 3/4", Lead Free Brass Barb Insert x 3/4" Female Pipe Thread Adapter, For Connecting 3/4" Cross Link Polyethylene Pex Tubing To 3/4" Male Iron Pipe Thread Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 3/4", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 3/4" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 1/2", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 1/2", Lead Free Brass Barb Insert Tee, For Connecting 3 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 1/2", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 3/4", Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 3/4" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 3/4" x 3/4" x 1/2", Lead Free Brass Barb Insert Tee, To Make A 1/2" Branch From A 3/4" Run Of Cross Link Polyethylene Pex Tubing, Secure The 1/2" Barb End Of Fitting To 1/2" Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Secure 3/4" Barb Ends Of Fitting To 3/4" Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Sweat Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Copper Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 C" Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
10 Pack, 3/4" Lead Free Brass Barb Insert x 3/4" Female Pipe Sweat Adapter, For Connecting 3/4" Cross Link Polyethylene Pex Tubing To 3/4" Copper Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" x Closed 4" x 8" Pex Barbed Copper Stubout Elbow, Without Nailing Plate, Used To Make 90 Degree Turn Inside Walls To Outside For Connection To Plumbing Fixtures, 1/2" Pex Barbed End For Connection To 1/2" Pex Pipe Using 1/2" Cinch Clamp Or 1/2" Copper Crimp Ring, Copper Stubout End Is Then Cut Off To Allow Shut Off Valve To Be Secured To End Using Push On Shut Off Valve, Compression Connection Shut Off Valve Or Sweat Copper Shut Off Valve.
Sharkbite, 1/2" x 6", Pex Copper Stub Out Elbow, Lead Free, For Use With A Wide Range Of Fittings.
1" Barb Insert x 1" Female Iron Pipe Thread, Brass, Lead Free Adapter, For Connecting 1" Cross Link Polyethylene Pex Tubing To 1" Male Iron Pipe Thread Pipe End Or Fitting, To Secure Barb Ends Of Fittings To Pex Pipe May Use With TV #597-556 Cinch Clamps & TV #608-743 Cinch Tool, Or TV #597-325 Copper Crimp Rings & TV #597-693 Crimp Tool, Not Included, Immediately Testable To Well Over 100 PSI, Meets NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet Ab1953 California & Vt S152 Vermont Low Lead Restrictions.
10 Pack, 1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Pipe End Or Fitting, To Secure Barb End Of Fitting To Pex Pipe May Use With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet Ab1953 California & Vt S152 Vermont Low Lead Restrictions.
